Installation
Requirements
Section titled “Requirements”- Desktop PC with standard ATX front panel headers
- 5V USB power supply
- Installation in dry indoor environments only
- Installation by qualified personnel is recommended
Technical Data
Section titled “Technical Data”| Parameter | Value |
|---|---|
| Supply voltage | 5V DC (USB) |
| Maximum current | 1 A |
| Wi-Fi | 802.11 b/g/n |
| Chip | ESP32-C3 |
| Operating temperature | 0°C to 40°C |
Box Contents
Section titled “Box Contents”- 1x PC Restarter device
- 1x USB-A power cable
- 1x manual
Safety Preparation Before Installation
Section titled “Safety Preparation Before Installation”- Shut down the PC and unplug the power cable.
- Set the PSU switch to
0. - Press the power button for 5 seconds (discharge residual power).
- Open the case and ground yourself before handling components.
Connection and Wiring
Section titled “Connection and Wiring”PC Restarter is wired between the case power button and the motherboard header (man-in-the-middle).
| Connection | Description |
|---|---|
MB_PWR_SW | Connect to motherboard power-switch header |
MB_PWR_LED | Connect to motherboard power LED header (observe polarity) |
CASE_... | Connect to case front-panel cables |
After Installation
Section titled “After Installation”After wiring is complete, power the device via USB and continue with first-time setup.